La scheda C6-DLQ è disponibile in due versioni: Quad-Core e Dual-Core Lite. La scheda C6-DLQ è adatta per le seguenti applicazioni:

• Touch Controllers
• Macchine di Vendita (anche Outdoor)
• Macchine Ticketing e Parking
• Controlli di vario genere con HMI flessibile tipo Smartphone
• Automazione e Controllo Real-Time

Il supporto software di CJB fa sì che la C6-DLQ sia programmabile con IEC-1131 PowerPLC-Bridge e che l'interfaccia operatore, specialmente se gestita con un touch capacitivo (PCAP), sia user-friendly come quella dei più moderni smartphone e tablets.

La C6-DLQ supporta Embedded Linux, Windows CE7/2013 e anche QNX, il che la rende adatta ad applicazioni hard-real-time anche di controllo-assi.

The C6-DLQ Freescale iMX6-Quad/Dual-Lite ARM CPU board has these features:

• Freescale iMX6-Quad (MCIMX6Q7CVT08AD, i.MX6 MPU Quad-Core, 800Mhz Industrial Lidded Cover 21x21 MAPBGA) or Freescale iMX6-Dual-Lite (MCIMX6U5EVM10AC, i.MX6 MPU Dual-Core, 1000Mhz Industrial 21x21 MAPBGA)
• 1GB DDR3 RAM onboard
• 1x 64kB SPI-RAM (static) for permanent storage of data with unlimited write cycles, with battery backup (uses the same battery which keeps the Real Time Clock running)
• 2x UARTS: 1x RS485 (not insulated)and 1x RS232/RS485
• 4x USB ports
• 1x Ethernet 10/100/1000 with RJ45 90º socket
• 1x push-push socket for µSD flash card
• 1x LCD Interface with a 40pin ZIF socket to support 40pin FPC cables of TTL LCD panels (7” 800x480) with LED backlight and eventually with bonded resistive or capacitive touch
• 1x LVDS LCD Interface with a 30pin socket for LVDS LCD panels of any size
• 1x 4W/5W resistive touch panel (RTP) interface for the touch screen
• 1x i2C PCAP touch interface, with dedicated 8pin FPC cable ZIF connector (same signals are also available on a separate pin-header)
• 1x LED Backlight driver for the 7”LCD with selectable current values for most types of 7” LCD
• 1x 44 pin header for functional expansion. It delivers power, GPIO’s and SPI & i2C buses to external conditioning boards (if needed).
• 22x TTL GPIO’s, s/w selectable as Inputs or Outputs. Need external signal conditioning.
• 2x CANbus interfaces: 1 ready with field interface, 1 TTL, to be conditioned with external driver circuit, which can also become additional GPIO’s
• 1x AUDIO interface, with Audio-Codec and 3W onboard Amplifier for 4 Ohm speakers
• 1x RTC (Real Time Clock) Low-Power. Based on the same M41T0 used in our C2 or C0-UL boards, it only drains 1 µA from the battery
• 1x CR2032 Lithium Battery with battery socket, to give power to both the RTC and the SPI Static RAM
• 1x Mini-PCI-express socket for full-size mini-cards, with support for SIM card (if used with radio-modem cards)
• Power-Supply: single 9~36Vdc (Typically +12Vdc).
• Stand-by Mode: the C6-DLQ can be set to low-power standby mode
• Dimensions: 3”½ form factor, 101x146 mm
• Operating System: Embedded Linux or QNX6.6
• Certifications: CE. Verified for FCC-B.